Product Details

Product description

This AUX to USB adapter is exclusively designed for use in vehicles that have a 3.5mm AUX-IN port with built-in MP3 decoding functionality. It allows users to play MP3 music files stored on a USB 2.0 flash drive through the car’s audio system. This product does not transmit audio signals in a traditional AUX-to-USB direction and is not a standard audio cable.

Please note: This adapter does not function with devices that lack an MP3 decoding AUX-IN port. It is incompatible with passive AUX ports that only accept analog signals from phones or music players.

This product will not work with the following:

Headsets, speakers, phones, computers, cameras, microphones, monitors,

Headphones or earphones, Bluetooth or wired speakers, Portable media players, Mobile phones or tablets, Laptops or desktop computers,Game consoles or handheld entertainment systems

To ensure proper functionality:

Use only USB 2.0 flash drives (not USB 3.0 or external hard drives)Drive capacity should be 8GB or less, depending on vehicle supportFiles must be in MP3 format onlyDo not store folders, videos, or unsupported file types in the drive

Before purchasing, please verify that your car audio system supports reading MP3 files directly from a USB drive via the AUX-IN port. Most factory audio systems without this feature will not support this adapter.

This adapter is intended for a very specific use case. If you’re unsure whether your vehicle meets the requirements, we recommend contacting your car’s manufacturer or referring to the owner’s manual before purchase.

Troubleshooting Guide for AUX to USB Cable

(Only for Cars with MP3 Decoding AUX-IN Port)

This adapter is designed exclusively for cars with a 3.5mm AUX-IN port that supports MP3 decoding, allowing playback of MP3 files from a USB 2.0 flash drive via the car stereo.

If it does not work, please follow these steps:

Step 1: Confirm MP3 Decoding Support

Check your vehicle’s manual or consult the manufacturer to ensure the AUX-IN port supports reading and decoding MP3 files from a USB drive. If the port is passive (analog-only), the adapter will not work. Most factory stereos do not support MP3 decoding via AUX unless explicitly stated.

Step 2: Use a Compatible USB Drive

Only USB 2.0 flash drives are supported, with a recommended capacity of 8GB or less. USB 3.0, external hard drives, or high-capacity storage devices are not compatible.

Step 3: Ensure Proper File Format

Only .MP3 format files are supported. Files in WMA, WAV, FLAC, AAC, or other formats will not work. Do not include folders, videos, or other file types—use MP3 files only.

Step 4: Prepare the Drive Properly

Format your USB drive as FAT32 and avoid complex folder structures. For testing, load 5–10 MP3 files directly onto the root of the drive without subfolders.

Final Note:

If all above conditions are met and the adapter still doesn’t function, it indicates your car system is not compatible. This is a vehicle limitation, not a product defect.

Package Contain:

1x USB to Aux Audio Cable.

Features:

High Quality

Color: White

Length: Approx 18cm.

Connector:male to female

Jack:3.5mm stereo audio

3.5mm male: plug in the car AUX port

❤【Only Work with Your Car Aux Port】– This product allows you to play music on your car audio system using your U-Disk/USB Flash Drive with MP3 decoder
❤【CAR NEED MP3 DECODE FUNCTION】– Please make sure your Aux port has mp3 decode function that can read the mp3 file from U-disk.If your car don’t have this function,it will can’t work,PLS CONFIRM IT BEFORE YOU BUY!!!
❤【ONLY SUPPORT SMALL U-DISK CAPACITY AND U-DISK ONLY STORE MP3 FILES】– U disk capacity as far as possible not too large.It depend on the car’s AUX audio interface can support how much capacity
❤【ONLY SUPPORT MP3 MUSIC FORMAT】– This aux cable only support MP3 Music Format,and don’t make file in your U-DISK and don’t store other documents.
❤【AS THE MATCHING PROBLEM,IF NOT WORK,WE CAN REFUND DIRECTLY】– Only support the U-DISK,can’t charge for your phone or other device!