Expansion Module TCA9548A, 5 Piece Development Card 1 to 8 Channels

1. Simple work: Multiplexor is located in the I2C 0x70 address, which can be configured from 0x70 to 0x77. Simply write a byte with the desired multiplex output number in this port, and all future I2C data packages are sent to this port.
2. Great control: You can use 8 of these multiplexers in any direction 0x70-0x77 to control 64 I2C addressing sections identical.
3. Appearance wide: compatible with 3 V and 5 V, so that you can use it with any logical, very practical, reliable and efficient level.
4. Practical use: Connect up to 8 I2C devices with the same direction to a microcontroller and forward the commands to a selected sentence of I2C pines.
5. Easy to install: it comes with 5 sets, and each set has 2 pencil strips, it can also be inserted into a welding blanket.
Technical data:
Article type: Development Board
Supply voltage: 1.65 V at 5.5 V.
IIC address: 0x70 – 0x77
Frequency: 0 to 400 kHz.
Channel: 1 to 8 channels.
Restore: restore the lighting.
How to use:
The multiplexor itself is found in the I2C 0x70 (but can be adjusted from 0x70 to 0x77). Simply write a byte with the desired mutiplined output number in this port and BAM, all future I2C data packages are sent to this port. In , you can use 8 of these multiplexers in any direction 0x70-0x77 to control 64 I2C addressing sections.
Packaging list:
5 x Development Board
10 x pencil bar
[Compatibility] This module is compatible with the logical level of 3V and 5 V and offers practice and reliability for any voltage requirement. Enjoy integration into your.
[Efficient control] Manage and control of up to 64 I2C addressing sections with the help of this multiplexor manner Manage and control without problems. Rationalize the communication of your project for optimized efficiency.
[Optimized design] Route commands and commands with 8 I2C devices that share the same address for a microcontroller. Slowly kitchen the architecture of your for the efficient development of projects.
[Configuration without problems] with the PIN 2PCS header and the plug-and-play functions that it contains, this module can be installed quickly on an interference plate without welding. Start your project in a short time.
[Versatile expansion] Use 8 multiplexers per address to connect and control 64 identical I2C devices. Expand the possibilities of your project easily.