Plans
Devices
Add-Ons
Contact Center
Integrations
Product description
MANAYO in-line microphone preamplifier, which can Boost up the gain by 28db for your dynamic microphone or ribbon microphone to amplify your voice clearly.
Gain 28dB Input Dynamic Range 102db Output Noise ＜6uV Frequency Response 20Hz-20KHz THD+N ＜0.05%@1KHz Impedence 200Ω
Compatible with dynamic and ribbon mirophone
This amplifier is not work with condenser microphone.
Work with 48v Phantom power
Please turn on the 48v phantom power supply on your audio interface when using
28db clean gain
Boost up the gain by 28db for your dynamic microphone to amplify your voice clearly.
Metal housing
The microphone preamp is made of metal material, which is strong and durable.
Xlr interface
Balanced XLR interface which is compatible with most recording microphones and mixers on the market to make your transmission more stable.
Plug and play
You can plug it on your audio interface or microphone without istall any software.
Connected MANAYO DM3 to microphone but not work.
Please turn on the 48v phantom power on your audio interface or mixers when using. The microphone amplifier itself has no power supply and must be provided with 48v power by the phantom power supply to work.
How to test whether it work?
DM3 provides the previously fixed 28db gain. After the connection is successful and the 48v phantom power is turned on, the signal amplification is extremely obvious. You can compare the input volume before and after connection.
What should I do if a lot of noise is generated after installing the DM3 mic preamp?
The DM3 mic preamp provides fixed 28db gain.It amplifies the signal but also the noise.thus, you will feel a lot of noise is added.In this case,Please turn down the gain on your audio interface then the the noise will be smaller or even disappear.
I used it on a kalaoke system but it not work.
Most systems provide 24v phantom power while DM3 must be used with 48v phantom power. In this case, please connect an external 48v phantom power supply to DM3 to solve this problem, an audio interface without phantom power can also be solved this way
Is DM3 suitable for condenser microphones?
No! It only works with dynamic and ribbon microphones. If you connect a condenser mic such as AT2020 which mentioned in the review, it won’t damage any of your equipment because it has no power of its own, it just won’t work.
[Purpose]: Boost up the gain by 28db for your dynamic microphone or ribbon microphone to amplify your voice clearly.
[Directions]: You can connect it as follows: Dynamic/Ribbon microphone → XLR cable → MANAYO preamp → Audio interface with 48v phantom power; Or you can plug the amplifier directly into your microphone and connect it to your interface with xlr cable.
[Specifications]: Gain: 28dB; Input Dynamic Range:102db; Output Noise＜6uV; Frequency Response:20Hz-20KHz; THD+N:＜0.05%@1KHz; Impedence:200Ω
[Notice]: Please make sure there is a 48v phantom power supply on your audio interface.
[Notice]: Please make sure that your microphone is a dynamic or ribbon microphone, this amplifier is not work with condenser microphone.
Customers say
Customers find the microphone preamplifier works well and delivers clean gain, with one mentioning it provides +12dB of input boost. The sound quality receives positive feedback, with one customer noting its pleasant “pop” sound. Customers consider it good value for money, with one highlighting it sounds better for half the price. The build quality and noise level receive mixed reviews – while some find it well-built, others report noticeable output noise.
Reviews
There are no reviews yet.